What about iron volume? Thanks for sharing
Quote
calabash digger
you want a quite deep program heres the one I run and it will tag a 12 inch silver quarter coin and its quite.
Reactivity 2,silencer 0, sens 90-93 depends on noise,tx2 have run 3 but 2 is quiter and plenty deep.full tones ,audio res 5, 12 kh but run 7 sometimes,
disc 1 this knocks the ground noise out and uses iron as the baseline,notch 00-00.
Ive played around with the settings until I came up with this program its stable and deep. Seems like when you lower the reactivity to 1 or 0 you get more noise and the silencer on 0 helps too. This is a deep program and will hit 12 inch coins in my test garden. You will get a pop here and there in the headphones but its a very good deep program imo. My ground balance number here is 86=87 most places I manual lower mine to 88 its deep at that setting and quite. If I pump it or manual to the actual gb number seems like the machine chirps and chatters more to me. In my testing the machine will hit a 12 inch coin better with a neg gb or balanced to the actual gb number BUT it makes it more chattery, so I just lower mine maually to 88 and let it fly I mean if it will hit a 12 inch coin its plenty deep enough for me. btw I was told the ground notch feature did not affect performance , I found that when its used it does affect performance I tested it on the 12 inch coins and it made the signals weaker when I turned that feature on and ran ground notch down to 84 or something like that. those are just my findings.
