Re: Notch and Deep Targets with no VDI
If you have notched a Target ID # of lets say 65 it will not matter how deep or shallow a TID of 65 is. You will not hear it.65 is 65. We are talking about a target without a TID.
View ArticleRe: Half Dime, Mercury Dime and 2 Buffalo's
Sorry for asking that question of your post... I just see a number of ppl who say to notch out 97-99 to get rid of iron wrap around but now I'm curious what could be missed. I guess depending how the...
View ArticleRe: Notch and Deep Targets with no VDI
I don't know exactly what you are trying to say. I just went into my yard and did a test. In deus fast nickel reads 63 on air testing. I notched 00-72. On surface nickel is knocked out. Changed...
View ArticleRe: Notch and Deep Targets with no VDI
And some additional info. My 10" nickel in test garden- reactivity 1 silencer -1 loud and clear. Now if I go to notch expert feature and start at 99 and notch backwards, I can notch down to around...
View ArticleSome info on deus in iron
I I recently acquired a Blisstool v6 detector and have been doing some comparison testing, using the deus. Some interesting things I think we're discovered. You'll here some folks say deus is best at...
View ArticleRe: Notch and Deep Targets with no VDI
And for folks hunting old sites with loads of modern trash, try this. Notch 00-83 8 or 12khz reactivity 0 or 1 silencer -1. I'll bet you don't dig much shallow junk--- the deepest good stuff will...
View ArticleRe: Notch and Deep Targets with no VDI
Of course if your target is jumping around and it hits outside of the notch that you have set then it will give you a sound. This isn't the point of what has been asked. He has asked what sound any...
View ArticleRe: Notch and Deep Targets with no VDI
I urge you to go back and read the ops questions again. Your response to his questions was in fact incorrect. You can notch a nickel and when it gets so deep depending on the detector's settings it...
View ArticleRe: Notch and Deep Targets with no VDI
And I think I already proved even running a deus with hot settings all deeper depth detectable targets will come through tone wise as long as the approx 86-99 window is left open. Granted this is...
View ArticleRe: Xy screen
I don't use the xy screen--- no need plus it can lie or get confused with say a good target next to iron. Where are you running your disc???? For a beginner with deus try 8. Now get you some bigger...
View ArticleRe: Notch and Deep Targets with no VDI
Well I believe I answered all the ops questions. And I did just go back to my 10"nickel in test garden to reconfirm. If highest tone is being run in the 90 plus region--- high tone provided. I then...
View ArticleRe: Deeper Targets
like CT Todd said, check both ways. also, if you are running in higher frequency, you may have a very small object on your hand. I had a few very faint signals running at 18 and they were closer to...
View ArticleRe: Working from the assumption that "ALL METAL" is an aid to not missing...
I've had iron read 94 quite a few times using both my deus units, and 97, and 98'. Funny thing is I've never seen 95 or 96 over iron.
View ArticleRe: Notch and Deep Targets with no VDI
I have no idea what you're saying squirrel1. CTTodd understood my question correctly. I'm going to go back and read through your replies and see if I can understand what you're getting at. I feel like...
View Article